\documentclass[twoside]{article}
%-------------------------------------------------------
% Do not change anything between these "------"
% However, please contact the managing editor if you need
% any of the packages referenced here.

\pagestyle{myheadings}
\setlength{\oddsidemargin}{44pt}
\setlength{\evensidemargin}{44pt}
\setcounter{page}{1}

\usepackage{hyperref}
\usepackage{url,intmacros,graphicx}
\usepackage[numbers,sort]{natbib}
\usepackage[small]{caption}

\def\BibTeX{{\rm B\kern-.05em{\sc i\kern-.025em b}\kern-.08em
    T\kern-.1667em\lower.7ex\hbox{E}\kern-.125emX}}


\newcommand{\email}[1]{\\ \small{\url{#1}} \\}
\newcommand{\institution}[1]{\\ \parbox{3.0in}{\small{#1}}}
\newcommand{\keywords}[1]{\small\textbf{Keywords: }#1}
\newcommand{\AMSsubj}[1]{\noindent\textbf{AMS subject classifications: }#1}
\newcommand\whenaccepted{Submitted: (insert date);
                         Revised: (insert date);
                         Accepted:(insert date).}
                         
\newcommand{\EditorComment}[1]{\textcolor[rgb]{1,0,0}{\bf[Ed.: {#1}]}}
% \newcommand{\EditorComment}[1]{}  % To IGNORE

\def\qed{\unskip\kern10pt{\unitlength1pt\linethickness{.4pt}\framebox(6,6){}}}

\newtheorem{lemma}{Lemma}[section]
\newtheorem{theorem}{Theorem}[section]
\newenvironment{proof}{{\it Proof:\/}}{\hfill\qed}

% Use the following macro to make any variable into an
% interval.  (Also check intmacros.sty for various commands,
% and report any conflicts with other packages you use.)

%\newcommand{\ivl}[1]{\protect{\makebox{\boldmath $#1$}}}

% Other commands for intervals:

\newcommand{\Inf}[1]{{\underline{#1}}}
\newcommand{\Sup}[1]{{\overline{#1}}}
\newcommand{\midpoint}[1]{\text{\rm m}{\left({#1}\right)}}
\newcommand{\width}[1]{{\text{\rm w}{\left(#1\right)}}}

\newcommand{\pnt}[1]{{\check #1}}
\newcommand{\mig}[1]{{\makebox{\large$<$} #1 \makebox{\large$>$}}}


%-------------------------------------------------------


%  You may add additional packages here.  However, if they
%  are not available with the usual LaTeX distribution,
%  they must be supplied with the final, accepted LaTeX.

% Fill in your title here. (Retain the footnote.)
\title{The Reliable Computing \LaTeX{} Template: \\
       Some Examples\footnote{\whenaccepted}}

% Delete the "\and" or add more as needed
\author{A. U. Thor
\institution{Taiga Technical Institute, Northern University,
Cold Harbor}
\email{author@taiga.edu}\\
\and
A. Big Cheez\thanks{A. Cheez was supported by the
Luna Queso Verde Foundation starter grant number 10-9-8-7-6-5-4-3-2-1.}
\institution{More Import.\ Univ., Queso Grande, ABC123 Commonwealth of
Luna}
\email{cheez@importing.it}}

% Put a short running title within the first argument to
% this command.  Do not alter the second argument
\markboth{Thor et al, \textit{Reliable Computing Template}}
         {\textit{Reliable Computing, 2016}}

\date{}

\begin{document}
\maketitle
\begin{abstract}
Put your abstract here. Be clear and concise, to describe
accurately to a potential reader what is in the paper.  Avoid
numerical bibliographic citations and numerical references to
formulas in the paper proper.
\end{abstract}
% Put keywords appropriate to your paper here, as shown
\keywords{interval analysis, templates, journal publication}

% Put your AMS subject classifications into the argument of
% the following command.
\AMSsubj{65-00}

\section{Introduction} \label{sec:introduction}

All \LaTeX{} commands available with the \texttt{article}
document class are available, with some possible exceptions, as
noted in Section~\ref{sec:intmacros}.

\section{The \texttt{intmacros.sty} Package}
\label{sec:intmacros}

Originally proposed by Arnold Neumaier, then discussed a bit,
this style file is explained in \cite{Kearfott:2005:SNI}.  A
current copy may be found in
\url{http://interval.louisiana.edu/reliable-computing-journal/intmacros.sty},
while a paper describing a slightly earlier version of it is
available at
\url{http://www.mat.univie.ac.at/~neum/ms/notation.pdf}.

\section{Including Figures and Other Graphics}
The correct way to include figures is with the
\texttt{graphicx} package.  An example is
Figure~\ref{fig:template-example}.
\begin{figure}[t]
  \hspace{100pt}\includegraphics[scale=0.6]{vol-1-issue-1-cover-thumbnail.pdf}
\caption{Example of graphics inclusion: The very first issue of \emph{Interval Computations}}
\label{fig:template-example}       % Give a unique label
\end{figure}
Be sure to include all graphics files in any final submissions.

\noindent{}Note: The current preferred graphics compilation scheme is
with PDF-\LaTeX, but we can also accept encapsulated Postscript ($*$.eps) figures
or figures in other formats if necessary.


\section{Managing Citations}

Use of \BibTeX{} is encouraged, since is automates formatting
the bibliographic entries properly, as well as numbering and
referencing them.  An example bibliography, used for creating
the reference in this document, is included at
\url{http://interval.louisiana.edu/reliable-computing-journal/example.bib},
while an extensive collection of \BibTeX{} bibliographies can
be found at
\url{http://www.math.utah.edu/~beebe/bibliographies.html}.  We
supply \BibTeX{} entries to articles appearing in this journal,
as do many other journals and citation clearinghouses.

\section{Style Notes} \label{sec:style-notes}
In \textit{Reliable Computing's} style, words in the title, section headings,
and subsection headings, other than articles and conjunctions, are 
capitalized.

\section*{Acknowledgements}
The Managing Editor wishes to thank the referees and authors
who participated while the journal was in transition to its
current on-line state for their extensive work and patience.

\bibliographystyle{plain}
\bibliography{example}

\end{document}